Quote:
Originally Posted by mustangsurfer
I have only used them once, and the carb would not shut off and spilled fuel all over the engine. They tried to blame it on dirt on the needle seat. I rebuilt it proper and it runs just fine now.
Dave
|
Mine did the same thing. Except on mine the float was installed incorrectly. Yeah they 'tested' it before it shipped. BS.
They also tested it and missed that the secondary throttle plates did not close....again BS. The carb looked great but Pony DOES NOT properly rebuild and test the carbs the way the advertise and charge for. Crooks as far as I am concerned. There really needs to be another option for an OEM 4100 properly done.
