Thanks Guys. What I did was leave the pink wire hooked up and jumped a wire from the bat to the coil and that worked fine except the factory tach did not function properly.If I run a bypass wire from under the dash to the coil my tach will not work right either. 22gt you are right that my voltage has dropped to 10.2 in the system with the lights on and years ago it would stay around 12 volts, so maybe a alt rebuild with a one wire conversion would keep voltage up enough to maintain 7 volts at the coil.Am I going in the right direction or chasing my tail!!Thanks for the help.Herb.
|
