Vintage Mustang Forum
HomeForumGalleryClassifiedsAbout UsAdvertiseContact Us
» Featured Product
» Sponsors
» Network Links
»Super Springs
Go Back   Vintage Mustang Forums

Vintage-Mustang.com is the premier Vintage Mustang Forum on the internet. Registered Users do not see the above ads.
View Single Post
Old 11-03-2009, 08:36 PM   #10 (permalink)
70 Mach One
Junior Member
 
Join Date: Nov 2009
Posts: 9
Default

Quote:
Originally Posted by A_65_Myself View Post
I just did this job in two of my cars a few weeks ago. There are #4 nuts to remove up under the dash, and one bolt from the engine compartment side. BUT, on one of the cars, the stud had 2() nuts on it--one that held on (also) a brace to the lower dash, and beneath that was the "real" nut holding the booster in. This was a car that had never been touched, and it was the second job that I did. I also couldn't figure out why the booster was loose-ish, but wouldn't come right out. Once I got the "hidden" nut off, the booster was not stuck on, it come right off. I can post a picture if you need it, but it was a stud to the gas pedal side of the booster, and not the top one. Good luck.
Bubba,

Wow - I'd never find that!. If you say it is under that brace? - then I'll pull the brace as it is almost off anyway. I'm not sure that I'll have time today but I'll take a look at that tomorrow and report back.

The devil is always in the details!

Thanks much!
70 Mach One is offline   Reply With Quote
 
Powered by vBadvanced CMPS v3.1.0

All times are GMT -4. The time now is 05:33 AM.


Powered by vBulletin® Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.