CJ Pony Parts Gotta Have It Race - Vintage Mustang Forums
Vintage Mustang Forum
HomeForumGalleryClassifiedsAbout UsAdvertiseContact Us
» Auto Insurance
» Featured Product
Go Back   Vintage Mustang Forums > Supporting Vendors > CJ Pony Parts
Vintage-Mustang.com is the premier Ford Mustang Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools
Old 05-07-2012, 12:31 PM   #1 (permalink)
Supporting Vendor
 
Steve@CJPP's Avatar
 
Join Date: Jul 2010
Location: Harrisburg, PA
Posts: 551
Default CJ Pony Parts Gotta Have It Race

Gotta Have It Race gets its first modifications!


We made it less than one week before we started making a few modifications to Gotta Have It Race. Of course, we did have to get ready for the track this weekend.

On Wednesday, several CJ’s team members got down to work installing four parts for Gotta Have It Race’s big unveiling at the track this weekend:



First, the team got to work on the front wheels and tires, which was very easy: Just remove the old and swap in the new!



The next task was the BMR Swaybar Relocation Kit. It took a little longer, but with the experience of CJ Pony Service, was no big deal!



Then, the rear wheels and tires went on:



Finally, the Barton Short Throw Shifter and Barton Shifter Bracket were installed:


The stock shifter being removed.



The new Barton Shifter being installed.

Check out a few shots of the finished product:





We’ll be providing much more detailed videos and blogs on these installs soon, so check back in a week or two when they are ready to go!
__________________
Steve Riss | Forum Administrator
CJ Pony Parts, Inc.
1-800-888-6473 ext. 143

Facebook | Twitter | Google + | YouTube | CJ Blog

Last edited by Steve@CJPP; 05-08-2012 at 05:47 PM.
Steve@CJPP is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 05-07-2012, 04:01 PM   #2 (permalink)
Supporting Vendor
 
Steve@CJPP's Avatar
 
Join Date: Jul 2010
Location: Harrisburg, PA
Posts: 551
Default

This past weekend the guys were at the NMRA event at MIR. They raced the Gotta Have Race, Gotta Have Street and The Raptor. The Gotta Have Race put down a great 12.08 @ 111 time towards the end of the weekend. Stay tune for more info and video to follow in the next couple of days. Until then here is the time slip.

__________________
Steve Riss | Forum Administrator
CJ Pony Parts, Inc.
1-800-888-6473 ext. 143

Facebook | Twitter | Google + | YouTube | CJ Blog
Steve@CJPP is offline   Reply With Quote Quick reply to this message
Old 05-08-2012, 05:41 PM   #3 (permalink)
Supporting Vendor
 
Steve@CJPP's Avatar
 
Join Date: Jul 2010
Location: Harrisburg, PA
Posts: 551
Default


CJ Pony Parts - Gotta Have It Race Runs 12.08 @ 111.29 - May 5th, 2012

Gotta Have it Race ran at Maryland International Raceway on May 5th, 2012 at the NMRA Ford Nationals and recorded its best run of 12.08 @ 111.29 with a 1.68 60 foot. Gotta Have it Race was able to hook up while leaving the line at 5,000 rpms and shifting at 7,000 rpms.

The pass was made with Race Star Industries 17x4.5 Dark Star wheels, with M&H Racemaster skinnies on the front and 15x10 Dark Stars, with 275/50-15 Mickey Thompson drag radials on the rear. The rear tire pressure was run at 24 PSI.

The only modifications to the car, aside from the Race Star wheels and drag tires, were a Barton short throw shifter and a SCT iTSX to raise the redline so that we did not hit the rev limiter in 4th gear before the finish line.

Gotta Have it Race had slightly more than 200 miles on it and weighed in at 3,760 lbs with the driver's weight included.
__________________
Steve Riss | Forum Administrator
CJ Pony Parts, Inc.
1-800-888-6473 ext. 143

Facebook | Twitter | Google + | YouTube | CJ Blog
Steve@CJPP is offline   Reply With Quote Quick reply to this message
Old 05-08-2012, 08:52 PM   #4 (permalink)
Senior Member
 
Join Date: Nov 2010
Location: Columbia, SC
Posts: 331
Default

Hate to be "that guy" but I don't think it looks right with those massive fender gaps... Maybe lower it?
__________________

1966 Mustang Coupe. I6 to V8 conversion. 1990 EFI 5.0, T5, and 8.8 rear with disc brakes. Hedman headers dumped through glasspacks. CSRP front disc brakes (Best purchase of the entire swap) and steering components. Shelby/Arning UCA relocation (drop) with 1" lowering coils (620#).
tiger1dd is offline   Reply With Quote Quick reply to this message
Old 05-09-2012, 09:12 AM   #5 (permalink)
Supporting Vendor
 
Steve@CJPP's Avatar
 
Join Date: Jul 2010
Location: Harrisburg, PA
Posts: 551
Default

Quote:
Originally Posted by tiger1dd View Post
Hate to be "that guy" but I don't think it looks right with those massive fender gaps... Maybe lower it?
Oh don't worry mods are going to happen, we wanted base numbers so they ran it stock then put the bigs and littles on. This is a project car so things are going to happen in phases.
__________________
Steve Riss | Forum Administrator
CJ Pony Parts, Inc.
1-800-888-6473 ext. 143

Facebook | Twitter | Google + | YouTube | CJ Blog
Steve@CJPP is offline   Reply With Quote Quick reply to this message
Old 05-23-2012, 12:32 PM   #6 (permalink)
Supporting Vendor
 
Steve@CJPP's Avatar
 
Join Date: Jul 2010
Location: Harrisburg, PA
Posts: 551
Default


We were very pumped by our last pass with Gotta Have It Race a few weeks ago and couldn’t wait to get the car back on the track to see if the 12.08 pass was a fluke, or if could we duplicate or even BEAT that time without any major mods.

Patience is a virtue the Gotta Have Builds team doesn’t possess, so they didn’t wait very long to get back out there. Cecil County Dragway in Northeast Maryland has always been their home track, and a Saturday test and tune on May 12 was calling their name.

Bill Tumas and the team loaded up supplies in the support vehicle, and headed to Maryland with two CJ Pony Parts customers, who brought a modified 2011 GT and a 2011 GT500. They got to the track around 8:30 am and the lanes were pretty empty, so they installed drag radials on both 2011 cars, prepped Gotta Have It Race and headed to the lanes for tech inspection. After passing tech inspection with no problems, they headed out to the lanes.



Cecil County Dragway just redid the first 1/8th mile with all new concrete, so this was Bill’s first time racing on the new surface. Not knowing how much bite the track had that early in the morning, the initial plan was for a conservative first pass, but seeing that he had lined up with the customer’s GT500, that plan went out the window and the race was on.

“I did a nice, healthy second gear burnout to put some heat in the drag radials. A line lock has not been installed on the car yet, so I had to do an old school burnout by holding the brakes. I had 24 psi in the rear tires and revved the car to 5000 rpms, same as I did for the 12.08 pass the week before. Unfortunately, the surface wasn’t quite ready for that kind of launch, so Gotta Have it Race blew the tires off pretty badly on launch. The launch has always been tricky with a heavy car, bone stock suspension, and drag radials. You can’t simply dump the clutch; you need to ride it out of the hole a little bit, which puts a lot of heat in the clutch, but has given me a best 60 foot of 1.68 in the past.”

With all of the spin, the 60 foot time was 1.93, but the ET was a promising 12.17 @ 116.32mph. The MPH surprised Bill a lot, as he has always felt that the MPH timers at Cecil were a little on the high side, but the ET doesn’t lie. Bill ran right with the GT500, which was a huge surprise for everyone!

Bill pulled around for a second pass with 22 psi in tires and using the same launch. Gotta Have It Race still spun, but not as badly as the first pass, allowing Bill to have another 12.19 @ 115.51. The car felt clean on that pass, but he felt he could have hit the 2-3 shift a little cleaner and gotten the 11 sec pass the whole team wanted so badly.

After letting the car cool for 15-20 minutes, Bill decided to take it up and try it again. He used the same second gear burnout, except lowered the tire pressure to 20 psi.



“I staged and let the clutch go at 5000 rpm, like usual, and the car just wouldn’t accelerate in 1st gear. It felt real lazy, and the 60 foot time showed something was wrong”

He pulled around and looked under the hood and noticed some fluid on the clutch reservoir. After cleaning it off, Bill went up and tried again, but encountered the same exact issue. The team thought that the combination of the burnout and the launch might be putting too much heat in the factory hydraulic clutch setup. To test this theory, they cleaned up the reservoir again and let the car and driver cool down for over an hour.

After that, Bill pulled the car back up in the lanes and, since it still wasn’t busy, he was able to pull right up and make a pass. The weather was getting hotter, but the car was nice and cool at this point.

“I left 20 psi in the tires and did my usual 2nd gear burnout, but decided to try 4500 rpm this time and see what happened. The car left the line MUCH better this pass, with no hesitation at all. The 60 foot was 1.74, which is off its best, but still pretty good for our setup. I hit all my shifts cleanly and felt like this might be the 11 second pass we were all was looking for”

Unfortunately, it wasn’t meant to be, as he barely missed the goal with a 12.05 @ 115 mph. Had he been able to get back in the 1.6s with the 60 foot, Gotta Have It Race would have gone into 11’s no problem. The CJ’s team had to leave early so Bill tried to make his next pass immediately, but the clutch issue returned so they called it a day and drove home with a new best.



The CJ’s Team has a line lock nearing delivery, and found out a few things on the dyno that was ran two days after their day at Cecil County Dragway that will be addressed with a tune in the near future.
The 11’s will be ours next time out!!
__________________
Steve Riss | Forum Administrator
CJ Pony Parts, Inc.
1-800-888-6473 ext. 143

Facebook | Twitter | Google + | YouTube | CJ Blog
Steve@CJPP is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Vintage Mustang Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 07:46 AM.


Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.