1966 Build Sheets - Vintage Mustang Forums

Reply
 
Thread Tools
post #1 of 18 (permalink) Old 12-12-2007, 05:41 AM Thread Starter
Senior Member
 
Ponyman66's Avatar
 
Join Date: Oct 2007
Location: Charleston, SC
Posts: 1,597
Just over 23 years ago I purchased my current '66 Fastback. While putting around with it the first week I owned it, I discovered a copy of the build sheet (or broadcast sheet, if you prefer), wrapped around the main wiring harness under the dash. Unfortunately some of the sheet had deteriorated and was missing. The good news was, over 3/4 of it WAS there! I have kept the sheet safely tucked away ever since.

Through the years I've always wondered what the code entries meant. Folks with later models have some info available, as well as color code markings listed on their sheets. It seemed that information on the early models was lacking.

Recently Charles Turner posted an image link to a copy of a 1966 dealer order sheet he has. I got off my behind and scanned an image of my build sheet. While looking over the scanned image of my build sheet, I pulled up a copy of Charles' order sheet. I then realized the codes listed below the option descriptions on the order sheet coincided with the codes on my build sheet! While this may not be a shocking revelation to a few folks here, it sure was to me!! While I certainly haven't heard or read it all, I've never seen anyone mention this correlation before.

In order to put something together to reference in the future, I took all of the codes from the order sheet and cross referenced them to the build sheet blocks. This information was put onto a table. I figured while I was at it, I might as well put it up on the web. I created a page on a free host and it's now up for anyone interested.

You can access the page at:
1966 Mustang Information

Please be advised, this is a work in progress. Most of the codes are listed. Some build sheet blocks are not listed because they were unreadable or missing from my sheet. Repops are available to fill in the blanks, I just haven't gotten one. If you have the missing info and would like to share it, I'd be happy to add it in. Also, if you find any errors, please let me know. I only ask that you provide a reference to what you base your claim on.

I've also included some T-10 four speed information on the site, though not much. I plan to add to that as I find it. It's also provided me a more "permanent" spot to make the pdf file from the Shop Manual that I recently referenced in another thread '65 Shop Manual for the T-10 .

I hope someone finds this useful. I discovered my car was originally ordered with dual red band tires!

John Wilson
.

My factory GT '66 Fastback (photo circa 1984, and I still have it!)
Ponyman66 is offline  
Sponsored Links
Advertisement
 
post #2 of 18 (permalink) Old 12-12-2007, 06:00 AM
Senior Member
 
Join Date: Jul 2007
Location: St. Augustine, FL
Posts: 127
Great Data - Thanks!

Are these the sames codes that would appear on a "Buck Tag?" - I have a Metuchen car and my buck tag is around somewhere.

66 GT Coupe - Loaded w/ all options except HIPO.
I've owned it for 20 years now.
msimp227 is offline  
post #3 of 18 (permalink) Old 12-12-2007, 07:21 AM
Guest
 
Posts: n/a
No, the buck tag codes were more descriptive abbreviations for options that required some deviation from the base unit. For example..."FDS" for Fold Down Seat, "PDB" for Power Disc Brakes, etc...

Yes, the order sheet helps when decoding build sheet codes, but does not give all the information needed to completely decode one.
post #4 of 18 (permalink) Old 12-12-2007, 01:13 PM
Senior Member
 
mishalah's Avatar
 
Join Date: Aug 2004
Location: Las Vegas
Posts: 1,267
I've seen the replications of the smaller sheet (request?), but are there blank build sheet forms, too?

Help....I've fallen and I can't get up....'cause this car is killin' me.

1966 GT vert. 6R08Axxxxxx
76B 5 F6 11DSO 71 1 6
mishalah is offline  
post #5 of 18 (permalink) Old 12-12-2007, 06:07 PM
Senior Member
 
Join Date: Jan 2003
Location: Calif
Posts: 6,807
Nice work... have a decoder someone else put together about ten years ago... will try and find it , then compare it to what you came up with

The author of that one had found/been given a fair number of early build sheets

Jeff Speegle
Come see us @ ConcoursMustang.com
MCA Shelby Judge, SAAC & Team Shelby Judge (in no particular order
Jeff_Speegle is offline  
post #6 of 18 (permalink) Old 12-13-2007, 12:18 AM Thread Starter
Senior Member
 
Ponyman66's Avatar
 
Join Date: Oct 2007
Location: Charleston, SC
Posts: 1,597
Thanks for the comments. As Charles stated, the buck tag codes are different. There's a German website that lists some info on them. Here's a link to it:
Body Buck Tags

John Wilson
.

My factory GT '66 Fastback (photo circa 1984, and I still have it!)
Ponyman66 is offline  
post #7 of 18 (permalink) Old 12-13-2007, 12:41 AM Thread Starter
Senior Member
 
Ponyman66's Avatar
 
Join Date: Oct 2007
Location: Charleston, SC
Posts: 1,597
Jeff, thanks for the kind words. I feel like an absolute beginner compared to the great info you, Charles, Laurie and several others here routinely post.

I'd really appreciate any info you'd care to add in to the page. I wanted to get it online, so there's still work to be done just with additional info I've found in the past day or so. I've also been able to locate most of the missing block info that had deteriorated from my sheet. I just need to get it added on the page.

One thing I plan to note on the page is the block titles. My sheet was printed July '65, and I've noticed that there are variations for some of the blocks. I've only been able to look at 3 or 4 other early sheets that I've found posted in other threads. I really love messing with stuff like this! :p Thanks again!

John Wilson
.

My factory GT '66 Fastback (photo circa 1984, and I still have it!)
Ponyman66 is offline  
post #8 of 18 (permalink) Old 12-13-2007, 09:45 PM
Senior Member
 
Join Date: Sep 2005
Location: Pawnee, Il 62558
Posts: 813
Jim Osborn Reproductions sells an order sheet for 64.5 Mustangs. It is dated January 64, and is somewhat different than the 66 that Charles Turner posted. It still is form FD 1841-M but for instance lists tire options as 6:50 13 4 ply, 6:50 X 14 4 ply, and 7:00 X 13 4 ply. The 289 4 V low compression "D" code engine is an option along with the 260. It also has a box to check for the "blue top" that drives people nuts in some areas of the MCA. I will scan and send this to someone who can post it if anyne is interested in seeing an "earlier" order sheet.

murf
jjmurphy is offline  
post #9 of 18 (permalink) Old 12-14-2007, 09:27 AM
Senior Member
 
66kgt's Avatar
 
Join Date: Oct 2003
Location: East Central Illinois
Posts: 1,004
I can post it for you John...

1966 KGT Coupe
1983 GT
2006 Roush Stage 2
2008 F250 4x4
66kgt is offline  
post #10 of 18 (permalink) Old 12-14-2007, 12:09 PM Thread Starter
Senior Member
 
Ponyman66's Avatar
 
Join Date: Oct 2007
Location: Charleston, SC
Posts: 1,597
That would be great. I appreciate the offer from both of you guys.

John Wilson
.

My factory GT '66 Fastback (photo circa 1984, and I still have it!)
Ponyman66 is offline  
post #11 of 18 (permalink) Old 12-14-2007, 02:05 PM
Senior Member
 
66kgt's Avatar
 
Join Date: Oct 2003
Location: East Central Illinois
Posts: 1,004
I got the scan from John and will post it later, too busy at the moment to edit it down a little...

1966 KGT Coupe
1983 GT
2006 Roush Stage 2
2008 F250 4x4
66kgt is offline  
post #12 of 18 (permalink) Old 12-14-2007, 07:02 PM
Senior Member
 
66kgt's Avatar
 
Join Date: Oct 2003
Location: East Central Illinois
Posts: 1,004


(Removed due to possible copyright infringement)

1966 KGT Coupe
1983 GT
2006 Roush Stage 2
2008 F250 4x4
66kgt is offline  
post #13 of 18 (permalink) Old 12-14-2007, 09:51 PM
Guest
 
Posts: n/a
Fellas, not to spoil any fun, but this might be a copyright violation of Jim Osborn reproductions.
post #14 of 18 (permalink) Old 12-14-2007, 11:26 PM
Senior Member
 
66kgt's Avatar
 
Join Date: Oct 2003
Location: East Central Illinois
Posts: 1,004
I was kinda wondering about that...

I'm pulling it down from the public forum, if you missed it and want a copy ask.

1966 KGT Coupe
1983 GT
2006 Roush Stage 2
2008 F250 4x4
66kgt is offline  
post #15 of 18 (permalink) Old 12-15-2007, 03:04 AM Thread Starter
Senior Member
 
Ponyman66's Avatar
 
Join Date: Oct 2007
Location: Charleston, SC
Posts: 1,597
Would you mind emailing me a copy? I believe it would be exempt from copyright under fair use, but having had my own research works plagiarized by a commercial company for use in their advertising, best left un-posted and be safe. Thanks for trying...even though Charles had to rain on our parade. Just kidding Charles!

John Wilson
.

My factory GT '66 Fastback (photo circa 1984, and I still have it!)
Ponyman66 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Vintage Mustang Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome