cmefly cmefly is online now
- Total Albums: 1
- Total Pictures: 3
- Albums Created by cmefly
- Total Messages: 2
- Most Recent Message: 06-03-2013 10:32 AM
- Visitor Messages for cmefly
- Last Activity: Today 03:37 PM
- Join Date: 03-16-2011
- Referrals: 0
Showing Friends 1 to 1 of 1
- Senior Member
- zhlange is offline
|10:17 AM - cmefly quoted rose62 in post SN95
Are they reliable? Will a ...
|08:26 AM - cmefly quoted Ford.P51 in post Edelbrock Air Gap
There's a big difference betw...
|08:04 AM - Ford.P51 quoted cmefly in post Edelbrock Air Gap
It will fit but as I said b...
|08:50 PM - Tallguy quoted cmefly in post Epoxy Primer and U-Pol Raptor Liner
I would use Eastwoods Ceram...
|06:02 PM - zray quoted cmefly in post 10x2.5 rear brakes
The brakes I got from the 6...
|10:55 AM - cmefly quoted zray in post Motor mounts not aligning?
... and cheap plug for Zray, I installed your cr...
|06:02 AM - cmefly quoted Brianr390 in post Finally building my 289 and want some advice
So I found some afr 165 heads ...
|02:33 PM - cmefly quoted ddaytona1 in post Recommend a raised white letter tire?
I was going to get BF goodrich...
|12:02 AM - 66whitepony quoted cmefly in post New Rear End
That will hold up to a lot ...
|06:02 PM - cmefly quoted 66whitepony in post New Rear End
The rear is a 1330. They are bu...
|05:51 PM - 66whitepony quoted cmefly in post New Rear End
Are you using a 1330 or 135...
|05:37 PM - cmefly quoted 66whitepony in post New Rear End
Finally got the rear end in. M...
|08:04 PM - 68FordMustang quoted cmefly in post Cam Selection
You should skip the Air gap...
|07:58 PM - cmefly quoted 68FordMustang in post Cam Selection
351w (roller converted with linked...
|05:29 PM - 66whitepony quoted cmefly in post New Rear End
You spent some money. Must ...
|05:24 PM - cmefly quoted 66whitepony in post New Rear End
Finally received everything and ...
|10:33 PM - patrickstapler quoted cmefly in post Alignment numbers for my 65
Look again, the Toe is 1/8"...
|03:14 PM - cmefly quoted TheMaineEvent in post Alignment numbers for my 65
I was hoping that was the answer s...
|03:05 PM - cmefly quoted patrickstapler in post Alignment numbers for my 65
Was there a reason they couldn't ge...
|10:50 AM - cmefly quoted TheMaineEvent in post Alignment numbers for my 65
I'm having my 65 aligned and I've ...
|iTrader Profile||Recent Ratings|