Vintage Mustang Forums banner

Mach 1 Rear Anti Sway Bar

3K views 10 replies 9 participants last post by  spidernad 
#1 ·
Was the Rear Sway Bar standard on 1970 Mach 1? I know there is discussion as to whether it is necessary, but not only do I not have one, but I also have leaf spring mounting plates that would not accommodate them if I did. Also the fuel line on the drivers side is in the way of the mounting location where the bushings would be. In the interest of originality I would like to have one. I know the Boss 302 came with them but not sure about the Mach 1.
 
#5 ·
I added one long ago and it helped immensely to control torque roll...
 
  • Like
Reactions: Alan _MacDougall
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top