C6 Tranny in 69 Mach One Linkage question?

[Bobbyd38]

On my 69 Mach One, a previous owner swapped out the original FMX for a C6 and installed an Aftermarket B&M Shifter. I want to Keep the C6 but put back an original style Console and Stock Shifter. I have been doing some reading online and discovered getting the linkage/Shifter to work properly is often a challenge for people who have done this swap (installing a C6 in a stock 69/70 Mach 1).

Anyone do this swap before? Are there certain parts I need? Any info would be helpful, or referral to someone that might know?

Thanks,
Bob

[Maxum96]

I did this years ago on another 70 Mustang I had. I had to slightly modify the shift rod where it hooked up to the trans. Otherwise, no problems. After all, if you got a big block in a 69/70 with an automatic, it would have been a C6 and there is only 1 auto shifter for Mustangs.