Join Date: Oct 2009
Location: Mooresville, IN
Been working on isolating the trunk area from the passengers compartment per rules. I made poster board patterns of the package tray area and the fiberboard that goes behind the backseat.
Diamond plate fitted:
Didn't get a picture of the pattern for the back board but you get the idea. Here's the two pieces laying in their approximate locations:
I welded some light angle iron at the part line, haven't decided if I'm going to rivet them together or tack weld them. I don't foresee having to remove the divider so it may just get tacked.
From the front with clamps holding them together:
More forward motion!
So Many Cones, So Little Time!