1967 Mustang Convertible - Vintage Mustang Forums
 
Thread Tools
post #1 of 2 (permalink) Old 03-21-2019, 02:08 PM Thread Starter
Member
 
cahorne's Avatar
 
Join Date: Sep 2010
Location: North Texas
Posts: 48
1967 Mustang Convertible

1967 MUSTANG V8 CONVERTIBLE $25,000.00
Power Disc Brakes, Power Steering, Power Top and AC

• BODY
o Passenger and Driver side floors and seat risers replaced, primered and sealed
o Complete undercarriage detail and restore in red oxide and black
o Strut tower seam welded added strength needed in convertibles
o Complete sound proofing under carpet and sound deadener
o New front disc Brake calipers, Booster, Lines, Master Cylinder, rear wheel cylinders
o NEW Upper Control Arms, Springs, Shelby Drop, Alignment, Roller Perches, Roller Idler Arm, Baer Bump Steer Kit, Shocks, New Steering Rag Joint
o New GT gas cap
o New chrome Convertible top boot snaps
o New white GT stripes
o Complete engine compartment detail and paint
o White Lower GT Stripe Kit
o NEW Lower Chrome Kick Panels
• INTERIOR
o New front seat covers
o New deluxe carpet
o New turn signal switch
o Under dash R134 AC system with Sanden Compressor
o New Passenger Door Latch
o All window tracks cleaned and lubed
o New tack Strip on Top and detail of canvas, new Back plastic window
• ENGINE
o Completely fresh engine, with NEW hyper pistons, NEW rings, NEW Roller Comp Cam (512 lift 221 duration), Roller lifters, NEW double roller timing chain, GT40P Heads with fresh Valve job and NEW intake valves, NEW crower springs (90 closed/300 open), Roller Rocker Arms, headers, ARP Head Bolts, New Oil Pump, New Fuel Pump
o NEW exhaust with Flow Masters and GT tips
o NEW Holley 600 vacuum secondary carb with auto choke
o New Aluminum Champion Radiator with Electric Fan and Relay off Ignition Switch
o NEW plugs and wires
o NEW Petronix Electronic ignition & MSD coil, Relay for 12 Volts to Distributor
o Edelbrock AIR GAP Intake
o 100 Chrome Alternator
o New Power steering pump, lines and rebuilt slave cylinder were installed
o NEW battery and starter solenoid
• TRANSMISSION
o Freshly overhauled with new clutches, rebuilt valve body with shift kit, modulator, servos and all gaskets.
o Transmission Cooler
• Wheels and Tires
o Four NEW 205/45/17 front tires and 225/45/17 rear tires with 17” American Racing Hopster Wheels
• NOTES
o All interior lights work, tail lights, brake lights, hood turn signal lights, horn all in good working condition. This car stops great, turns easy and has good power.
o The undercarriage was stripped and detailed and painted. All new metal was sealed.
o The engine was bored, honed and assembled with new rings and bearings. The heads were purchased second hand and were sent to the machine shop (Calvert Precision Engines) for a complete valve job and new intake valves and springs to match the cam. The rocker arms were replaced with blue roller rocker units. I used a powder coated intake and headers that I had extra.
o The transmission was gone through by Broader Performance in Weatherford, as well as the valve body. The converter was loosened to 2300-2500 for the roller cam.
o The rear end still has the factory 2.73 gears and single track.
CURTIS HORNE
972-740-9426
Attached Images
File Type: jpg 2018-12-23 16.12.41.jpg (505.3 KB, 27 views)
File Type: jpg 2018-12-23 16.13.22.jpg (483.9 KB, 25 views)
File Type: jpg 2018-12-23 16.13.39.jpg (445.4 KB, 27 views)
File Type: jpg 2018-01-26 11.43.19.jpg (461.5 KB, 22 views)
File Type: jpg IMG_0313.jpg (444.4 KB, 22 views)
File Type: jpg 2019-01-14 16.53.17.jpg (511.7 KB, 26 views)
File Type: jpg 2019-01-15 19.05.13.jpg (417.5 KB, 22 views)
File Type: jpg 2017-01-09 16.03.01.jpg (370.6 KB, 23 views)
File Type: jpg 2018-12-23 16.13.46.jpg (411.6 KB, 25 views)

66 Mustang coupe, 363 Dart, 4R70W transmission, 9" 4.30's, E-85, mini tub with 28X10.5 PBR.... 6.01 @113 1/8 mile with a 1.32 60'
cahorne is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 04-22-2019, 11:17 AM Thread Starter
Member
 
cahorne's Avatar
 
Join Date: Sep 2010
Location: North Texas
Posts: 48
sold

66 Mustang coupe, 363 Dart, 4R70W transmission, 9" 4.30's, E-85, mini tub with 28X10.5 PBR.... 6.01 @113 1/8 mile with a 1.32 60'
cahorne is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Vintage Mustang Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
My Springtime Yellow 1967 Mustang Convertible is for sale ~ ziurtoys 1967 through 1968 Mustangs For Sale 3 03-22-2019 08:24 PM
1967 Mustang Convertible Dash to Tail light harness hemihunter67 1967 through 1968 Mustang Parts For Sale 2 01-01-2019 12:25 PM
1967 mustang convertible pricing opinion kpt112 Vintage Mustang Forum 11 12-24-2018 02:45 PM
1967 Mustang Convertible pro touring hemihunter67 1967 through 1968 Mustangs For Sale 0 07-15-2018 01:30 AM
1967 Mustang convertible Wayne67vert 1967 through 1968 Mustangs For Sale 1 06-03-2018 09:01 PM

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome