Vintage Mustang Forums - Conversation Between Rorin67 and arden12
Conversation Between Rorin67 and arden12
Showing Visitor Messages 1 to 1 of 1
  1. arden12
    11-19-2013 03:37 AM - permalink
    arden12
    my messages have been disappearing so here ya go....ok easy deal.

    1. listen for pinging with every change under different loads etc.

    2. set initial to 12 13. if it does not start slowly when hot or detonate you are good there.

    3. change springs so it is full adv at around 2600 - 3000 rpm.

    4. if there is no ping then try changing dist stop so you have around 38 total.

    5. if you have a vacuum advance canister you might not be able to run these settings but set the vacuum so it ads around 8 degrees in your driveway at around 1/3 throttle.
 
For the best viewing experience please update your browser to Google Chrome