Vintage Mustang Forums - View Profile: John7660

John7660 John7660 is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. John7660
    06-03-2017 05:18 PM - permalink
    John7660
    Gordon, I hope all is well! I have a 1967 Fastback S-Code 4-speed which is re-powered with a 428. It's a pretty modified full roller engine and has a ton of HP components. Runs pretty good but it's just a street car and I don't race it. I still have the original 390 which is stored away. I sort of cloned my car like a GT500 but is not badged as such. Don't worry, I didn't Eleanore it; not much on that. Unfortunately, I'm tackling an electrical Gremlin, I've lost power to my MSD ignition box. I believe it's an under dash ignition power wire but need to track it down. I've pulled out my instrument panel and am cleaning up the wiring now with a couple bus bars. While I'm at it, I've added LED bulbs to my gauges. I live about a 1/2 hour outside Suffolk so I'm an hour from the beach. My dad was in the Navy and Va. Beach was his last duty station. Do you show your car any or attend any local shows? John
  2. gordonr
    06-02-2017 06:37 AM - permalink
    gordonr
    Hey John sorry for the late reply. I read your message then when I went back to it the next day to respond to it and it was gone! I found it obviously this morning clicking around. Anyway I have 69 Mach 1 390 4 speed. I bought it locally over near Damneck from a widow. Her husband (retired Navy Chief) had died a year earlier and was the original owner. Had 89k on the odometer also. There doesnt appear to be hardly any vintage DIY guys here either so I hang out with some older guys from the Vette club. They seem to tolerate me. Lol. So what do you have?

    Gordon

  About Me

  • About John7660
    Biography
    If it's Old, I like It!
    Location
    South Eastern Virginia
    Interests
    Civil War & Colonial Relic Hunting, Restoring Vintage Benjamin & Sheridan Air Rifles, My Fastback
    Occupation
    Johnny Law

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 07-31-2019 09:15 PM
  • Join Date: 12-04-2012
  • Referrals: 0

  Mentions

No results to display...

  Quotes

12-28-2017
09:34 PM - John7660 quoted GypsyR in post Bingo
Same here! I found a mil...
12-22-2017
05:53 PM - John7660 quoted Huskinhano in post There Ya Go!
...it didn't happen. Huskinhano, thanks for the stor...
12-10-2017
09:29 AM - John7660 quoted rhutt in post Times 2
...cond the motion. Rhutt is spot on with this...
12-06-2017
08:12 AM - Hardtop68 quoted John7660 in post Heavy vibration
Just asking here but why repl...
08:06 AM - John7660 quoted Hardtop68 in post New Drive Shaft?
Just asking here but why repla...
11-30-2017
06:27 AM - John7660 quoted 66Darkhorse in post 2X
HI! If I were you the first thin...
08-21-2017
01:47 PM - bacchus203 quoted John7660 in post Best $200 mod ever (EPS).
... I don't know if you would...
07-19-2017
11:51 PM - Red68 quoted John7660 in post Fiberglass Deck Lid Poor Fit
Trash it and call Mustangs to...
07-02-2017
03:28 PM - Greg'66 5.0 quoted John7660 in post Quick Help on an Electrical Relay
Thanks to all my frat brother...
03:25 PM - Greg'66 5.0 quoted John7660 in post Quick Help on an Electrical Relay
Also, on another note, I fail...
06-07-2017
06:46 AM - John7660 quoted j persons in post 100 Amp Alternator
To insure full current flow wi...
05-21-2017
08:56 PM - Boom quoted John7660 in post What did you do to/for your Mustang today?
A lovely day ripping my dash ...
04-17-2017
11:54 PM - Blue Blood quoted John7660 in post Electrical connectors.
Ron Francis Wiring You wil...
04-05-2017
08:49 PM - John7660 quoted Maxum96 in post Yep
As a 32 LE officer I concur ...
03-17-2017
10:52 AM - 242 Motorsports quoted John7660 in post keep burning up 3G alternators
Sorry to hear about these iss...
09-01-2016
07:24 PM - evantugby quoted John7660 in post Bad News for my 1965 Mustang
When you say it's overheating...
08-30-2016
02:51 AM - toad quoted John7660 in post Exhaust manifold gasket keeps blowing ):
Here ya go! Fel-Pro Steel Co...
08-21-2016
10:07 PM - John7660 quoted Fastback1968 in post Cool old photos
Hmmmm! Okay, I'll take one of the...
10:05 PM - John7660 quoted Rorin67 in post Ha!
That be right funny, in fact...
08-20-2016
11:17 AM - IDSRVIT quoted John7660 in post New front suspension....Ugh.... Now I have a 4x4 now
Can you post a couple of pict...

  Feedback

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
0
0%
Members who left positive:
Members who left negative:
0
0
Total positive feedback: 0
Submit Feedback
  Past
Month
Past
6 Months
Past
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
 
For the best viewing experience please update your browser to Google Chrome