Vintage Mustang Forums - View Profile: Turnall

Turnall Turnall is online now

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 4 of 4
  1. myfirstcar66
    04-04-2019 12:09 PM - permalink
    myfirstcar66
    Subpar 63 John reminded me you are in the Dothan area and when he gets his 66 down here May-ish he brought up maybe cruising to meet up sometime. I live in Auburn and it has been a LONG time since I cruised any more than about 25 miles from home. Would love to see your ride in person. Also enjoying your build thread. Hope to have the interior and AC done on the 66 I got for my son and me to work on by the time he turns 15 so we can do driving lessons in it !! Enjoy the Spring. -- Dave
  2. Caper50
    10-07-2017 06:40 PM - permalink
    Caper50
    Allen, just wondering if you could send me pics of your vacuum routing. I tried looking through the manual but can't seem to find it. I ran a temporary line from the passenger side of the carb to the distributor but that's it. I just realized I have no vacuum pressure on that line when I went to disconnect it at the distributor to set the timing. I tried searching the net for complete pics but no luck. Any help is appreciated. Btw, I got a set of rad and heater clamps...Scott drake brand, they are supposed to be concours...they are absolute junk. They were the source of my coolant leaks. My email is [email protected]

    Cheers,

    Brian
  3. 1969sag
    12-13-2016 12:21 PM - permalink
    1969sag
    I am kind of at my bottom. I bought this guitar as an investment. I Know it will be worth a lot more in the future. I am at the point on this guitar that I would rather keep it, than loose any more money from selling it. I could really use the money. BUT. I could sell it fast for fast cash any day of the week, for 3,000.00, If I wanted to take a loss on it. I just can't bring myself to sell it cheaper at this point.
  4. atitagain
    08-22-2016 10:45 PM - permalink
    atitagain
    Sir,

    I am a noob but unless the camera flipped the image or your did a MCE cheat your piston notches look like they are pointed aft? Again you seem way more experienced but just had to ask incase it was a mistake

  About Me

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Today 08:58 PM
  • Join Date: 01-31-2013
  • Referrals: 0

  Friends

Showing Friends 1 to 3 of 3
  • Caveman49
    • Caveman49 is offline
  • myfirstcar66
    • myfirstcar66 is offline
  • RM69
    • RM69 is offline

  Mentions

06-09-2019
06:55 PM - Turnall mentioned Boss5Oh in post 1969 Mach 1
...killer myfirstcar66 Boss5Oh Allen
06:55 PM - Turnall mentioned NEFaurora in post 1969 Mach 1
...der17 TheMaineEvent NEFaurora Hemikiller myfirstca...
06:55 PM - Turnall mentioned Groundpounder17 in post 1969 Mach 1
....:wink: 69GT350H Groundpounder17 TheMaineEvent NEFaur...
06:55 PM - Turnall mentioned TheMaineEvent in post 1969 Mach 1
...50H Groundpounder17 TheMaineEvent NEFaurora Hemikiller...
06:55 PM - Turnall mentioned 69GT350H in post 1969 Mach 1
... on VMF...:wink: 69GT350H Groundpounder17 TheM...
06:55 PM - Turnall mentioned myfirstcar66 in post 1969 Mach 1
...EFaurora Hemikiller myfirstcar66 Boss5Oh Allen
05-30-2019
09:02 PM - Turnall mentioned patrickstapler in post 66 T Code - T is for Transformation
...he cam card. Thanks patrickstapler!! Allen
05-29-2019
09:29 PM - Turnall mentioned patrickstapler in post 66 T Code - T is for Transformation
...the bolts needed. patrickstapler had told me that he ...
05-22-2019
09:18 AM - Turnall mentioned 2nd 66 in post 289 Build HP Predictions
2nd 66 Allen
05-19-2019
08:05 PM - Turnall mentioned macstang in post 66 T Code - T is for Transformation
...flat everywhere. macstang brought up a good po...
05-16-2019
12:28 PM - Turnall mentioned BlakeTX in post 66 T Code - T is for Transformation
BlakeTX has informed me in a...
05-14-2019
12:47 AM - Turnall mentioned patrickstapler in post 66 T Code - T is for Transformation
... silverblueBP and patrickstapler are helping me treme...
12:47 AM - Turnall mentioned silverblueBP in post 66 T Code - T is for Transformation
... knowledge I have. silverblueBP and patrickstapler ...
05-11-2019
07:18 PM - Turnall mentioned patrickstapler in post 66 T Code - T is for Transformation
...ng cover yet. Also, patrickstapler had warned me that h...
05-10-2019
01:37 PM - Turnall mentioned Huskinhano in post 66 T Code - T is for Transformation
...ctly and with RTV. Huskinhano Allen
05-03-2019
08:14 PM - Turnall mentioned Huskinhano in post 66 T Code - T is for Transformation
...s you're like Tom, Huskinhano, who basically alrea...
08:14 PM - Turnall mentioned Groundpounder17 in post 66 T Code - T is for Transformation
...mpressive Thanks Groundpounder17!! Hopefully I can he...
05-02-2019
07:31 PM - Turnall mentioned mkirkman99 in post No spark on 1 and 6 on 66 inline 6
mkirkman99, is the engine dying...
07:23 AM - Turnall mentioned silverblueBP in post Mike Maier Suspension
Reach out to Silverbluebp. He vintage races. I...
04-19-2019
10:03 PM - Turnall mentioned silverblueBP in post 66 T Code - T is for Transformation
...etting answers from silverblueBP and an engineer I kn...

  Quotes

07-14-2019
12:12 AM - elcam84 quoted Turnall in post Just recognizing a business (OK'd through moderators)
I'm impressed...that there's...
12:01 AM - Turnall quoted Ibcnul8r in post Just recognizing a business (OK'd through moderators)
located in Auburn, Washington...
07-13-2019
06:51 PM - Turnall quoted c.midland in post Just bought a 1969 Mach 1!!
Got the car home today. Seems ...
06:30 PM - Turnall quoted chadacates in post 289 dipstick tube
I am in way over my head. It...
06:20 PM - Turnall quoted Woodchuck in post AFR Numbers. Teach me...
Typically 14.7. Well, 14.7 ...
06:20 PM - Turnall quoted Kelly_H in post AFR Numbers. Teach me...
Typically 14.7. Well, 14....
06:20 PM - Turnall quoted patrickstapler in post AFR Numbers. Teach me...
Typically 14.7. Well, 14.7 may b...
06:10 PM - Turnall quoted chadacates in post 289 dipstick tube
The dingus that started this pr...
02:15 PM - Turnall quoted Tallguy in post Cam Break in COMPLETE! Had some vacuum/timing issues I am wondering about.
This is a big stressful mile...
07-12-2019
05:24 PM - Garth66 quoted Turnall in post GT350 Track F....
Hahaha, not his plan I don't...
02:14 PM - Turnall quoted elcam84 in post Full Restoration Processes & Procedures
The proper way is to tear it...
07-11-2019
11:49 PM - Turnall quoted 1ofAMillion+ in post Wiki Boss 429. Any English majors?
Not sure what you expect but I ch...
11:15 PM - vegasloki quoted Turnall in post Anyone see Fast & Loud Last night?
Not sure I've seen The Strop...
10:35 PM - Turnall quoted awhtx in post Just bought a 1969 Mach 1!!
... three..... Nice awhtx! The Mach 1 I picked...
09:25 PM - Turnall quoted vegasloki in post Anyone see Fast & Loud Last night?
The Strope or Kindig or Joe Ma...
09:06 PM - Turnall quoted 69bosssvt in post Just bought a 1969 Mach 1!!
Love the '69's the best...the ...
06:55 PM - Turnall quoted mexicruiser in post So close to finishing restoration and now this...
Well this didnít go thru, the se...
06:45 PM - mexicruiser quoted Turnall in post So close to finishing restoration and now this...
Yes. Could get a bit confusi...
10:52 AM - Turnall quoted mexicruiser in post So close to finishing restoration and now this...
Did you hear anything from the s...
10:16 AM - mexicruiser quoted Turnall in post So close to finishing restoration and now this...
Did you hear anything from t...

  Feedback

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
0
0%
Members who left positive:
Members who left negative:
0
0
Total positive feedback: 0
Submit Feedback
  Past
Month
Past
6 Months
Past
12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
 
For the best viewing experience please update your browser to Google Chrome