RV6 RV6 is offline
- About RV6
- Pine, Colorado
- Cars, Airplanes and Guns
- Director of Lights and Magic
1967 Coupe, 289-4V, T-5
|04:57 PM - RV6 quoted Nick Mourning in post 1967 mustang shop manual
Well that sounds like a bummer, it...
|07:25 PM - sixtysevenGTconv quoted RV6 in post 1966 Mustang rear brake shoes not making full contact
Back in the day, when dr...
|05:41 PM - Fitch quoted RV6 in post Would you Replace This Ignition Coil ?
I only have numbers for ...
|05:36 PM - RV6 quoted Fitch in post Would you Replace This Ignition Coil ?
Thats the plan. Do you hap...
|05:29 PM - Fitch quoted RV6 in post Would you Replace This Ignition Coil ?
If it were mine I would ...
|07:18 PM - RV6 quoted patrickstapler in post Carb Insulators?
1/4Ē insulator will not accomplish ...
|05:41 PM - kenash quoted RV6 in post CDI Point setting?
Set the points to book v...
|04:01 PM - RV6 quoted 68projectcar in post Motor Mounts
yes, I spoke with him on the ph...
|02:12 PM - RV6 quoted 22GT in post Motor Mounts
Yes, all 67 289, all 68-7...
|08:32 PM - RV6 quoted Garth66 in post Bulging battery
Replace a suspect battery im...
|07:35 PM - gregb quoted RV6 in post 3G excite wire shortcut
I think the one labeled ...
|03:27 PM - RV6 quoted gregb in post 3G excite wire shortcut
There is one labeled I. It...
|05:25 PM - Seabseattle quoted RV6 in post POR15 power mesh?
If you can Power Mesh yo...
|04:23 PM - RV6 quoted Seabseattle in post POR15 power mesh?
Anyone ever used the POR15 power...
|04:01 PM - RV6 quoted oscarnielsen in post Will Not Start
Morning Once, again guys thank...
|05:06 PM - kellysedars quoted RV6 in post Excess brake pedal travel with new power front discs
My bone stock 67 with or...
|01:20 PM - RV6 quoted vtgearhead in post Strut rod bushings on a 66
Those look like a good in-betwe...
|08:02 PM - Nailbender quoted RV6 in post Anyone running Holley Terminator EFI and have a calibration set?
I have no experience wit...
|06:27 PM - RV6 quoted rbohm in post How many DOTs?
as i recall the reason tha...
|01:17 PM - RV6 quoted Roddster in post Axle bearing
$30.00 each....what??? Lab...
|iTrader Profile||Recent Ratings|