4R70W stock shifter mod - Page 2 - Vintage Mustang Forums
 3Likes
Reply
 
Thread Tools
post #16 of 24 (permalink) Old 03-23-2018, 03:01 PM Thread Starter
Junior Member
 
Join Date: Mar 2018
Posts: 11
Awesome tip guys, thanks. I also found a video on youtube where a guy used a smog pump bracket and added it to his stock shifter to make it work. I will reach out to Joe and see if he is able to offer any help. My baumann controller is coming next week. I post once pics of whatever worked.
Mikeg256 is offline  
Sponsored Links
Advertisement
 
post #17 of 24 (permalink) Old 11-05-2018, 12:54 AM
Member
 
Join Date: Jul 2016
Posts: 47
Quote:
Originally Posted by six_sigma View Post
I bought this one. It corrects the geometry and required much less fiddling.

https://www.summitracing.com/int/par...4/applications

So this works perfectly for the 4r70w using the stock shifter also??

64.5 Coupe to Fastback project, 2008 Torch Red GT500
Fede Garza is offline  
post #18 of 24 (permalink) Old 11-09-2018, 07:25 PM
Senior Member
 
Join Date: Oct 2014
Posts: 110
Quote:
Originally Posted by HoosierBuddy View Post
I used the stock cable from my 4R70W and modified my shifter slightly to accept it. Works great. I've got a pdf that describes the whole thing set up if you need it.

Phil
I sort of did this. I grabbed a shifter from a 2000 Mustang v6 and took the T handle off my 66 and it bolts right on. So basically, the shifter and cable setup from the 2000, and the handle from the 66 for looks.

1966 Mustang 302ci 4r70w, csrp front discs, 8.8 rear, EPAS, Fitech for fuel
copracr is offline  
 
post #19 of 24 (permalink) Old 11-15-2018, 10:03 PM
Senior Member
 
Join Date: Nov 2011
Location: Toronto
Posts: 114
Yup

Red 69 Convertible

AFTER:
Roller 302
AOD Trans
New 8" rear 3.80 POSI
Power assist Kelsey Hayes front disks rear drums
Rebuilt suspension
New Rims and Tires
Dual Exhaust
Manual steering

BEFORE:
200 CI I6
C4
7.25" rear 2.70 open
Manual Drums
Single Exhaust
Manual Steering
six_sigma is offline  
post #20 of 24 (permalink) Old 11-20-2018, 12:06 AM
Senior Member
 
Join Date: Sep 2017
Location: Los Angeles, CA
Posts: 168
Garage
Quote:
Originally Posted by copracr View Post
I sort of did this. I grabbed a shifter from a 2000 Mustang v6 and took the T handle off my 66 and it bolts right on. So basically, the shifter and cable setup from the 2000, and the handle from the 66 for looks.
Hey @copracr!

Do you have any pics of this at all?
-RD
rpm likes this.

An Aussie kid living in LA.....

My '66 Coupe Project Journal
TheDraytone is offline  
post #21 of 24 (permalink) Old 11-20-2018, 09:33 AM
Senior Member
 
Join Date: Oct 2014
Posts: 110
Quote:
Originally Posted by TheDraytone View Post
Hey @copracr!

Do you have any pics of this at all?
-RD
If you can point me to instructions on how to do that I can. I'm actually making a center console for it right now so it is all apart at the moment and I can get a pic of the guts of it.

1966 Mustang 302ci 4r70w, csrp front discs, 8.8 rear, EPAS, Fitech for fuel
copracr is offline  
post #22 of 24 (permalink) Old 11-20-2018, 07:52 PM
Senior Member
 
Join Date: Sep 2017
Location: Los Angeles, CA
Posts: 168
Garage
@copracr

I normally post my photos on Google Images then use the "insert image" link when I create a post. I think you could do it as an attachment too. Or if all that fails, I can DM you my email address

I was looking at the stock shifter from a Fox Body last night and never noticed there was a bolt in there. I am wondering if I can take my handle and surround and attach it to the fox body hardware. That'll be an ideal situation.

-RD

An Aussie kid living in LA.....

My '66 Coupe Project Journal
TheDraytone is offline  
post #23 of 24 (permalink) Old 01-21-2019, 10:11 AM
Senior Member
 
Join Date: Oct 2014
Posts: 110
https://photos.app.goo.gl/CPQjR7TEmDdbHafp9

Can you see this image?

1966 Mustang 302ci 4r70w, csrp front discs, 8.8 rear, EPAS, Fitech for fuel

Last edited by copracr; 01-21-2019 at 10:23 AM.
copracr is offline  
post #24 of 24 (permalink) Old 01-21-2019, 10:43 AM
Senior Member
 
Join Date: Oct 2014
Posts: 110
or this?

The base is off a 2000 m/y and the handle and upper part of the base came from a mid 60's m/y. I had to trim the opening a little bit for the cable shifter bracket and the holes in the sheet metal were a little off.
Attached Images
File Type: jpg ****er.jpg (346.2 KB, 4 views)

1966 Mustang 302ci 4r70w, csrp front discs, 8.8 rear, EPAS, Fitech for fuel

Last edited by copracr; 01-21-2019 at 10:46 AM.
copracr is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Vintage Mustang Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome