Looking to trade some 6cyl parts - Vintage Mustang Forums
Reply
 
Thread Tools
post #1 of 19 (permalink) Old 01-25-2008, 11:51 PM Thread Starter
Senior Member
 
Join Date: Nov 2002
Location: NJ
Posts: 1,813
I need a thermostat housing without the extra hole.

I have a whole slew of extra 6cyl parts. If you would like to trade for one with a extra whole i have that. I have a carburetor, fans, pulleys, oil pans, valve covers, air cleaners, a really bad door, a sway bar. If you have something else in mind just ask it seems i have two of every part except the one i need.

Thanks, Steve


67 I6 coupe to be restored

Now finally painted.... Until I sand it down and try again.
sparky65 is offline  
Sponsored Links
Advertisement
 
post #2 of 19 (permalink) Old 01-26-2008, 08:45 AM
Senior Member
 
Join Date: Aug 2002
Location: sw. florida ,port charlotte
Posts: 4,570
show me a picture of the one with the extra hole and ill look for you. wes [email protected]
mustang656man is offline  
post #3 of 19 (permalink) Old 01-26-2008, 01:23 PM
Senior Member
 
Join Date: Oct 2003
Location: N.Y.
Posts: 1,742
I'll take a look as well.If you would like to contact me regardless,It might be a good idea as I have a bunch of Mustang parts as well I might want to do some trading or buy pieces outright? I'm In N.Y. But I also go to Jersey quite frequently.
EastCoastClassic is offline  
 
post #4 of 19 (permalink) Old 01-26-2008, 02:02 PM
Senior Member
 
Stanger'66's Avatar
 
Join Date: Jul 2006
Posts: 259
How much for the carb? Autolite 1100, right?
Stanger'66 is offline  
post #5 of 19 (permalink) Old 01-26-2008, 09:39 PM Thread Starter
Senior Member
 
Join Date: Nov 2002
Location: NJ
Posts: 1,813
Quote:
Originally Posted by mustang656man
show me a picture of the one with the extra hole and ill look for you. wes [email protected]
Just to clarify i need one without the extra hole. I will send pictures shortly.

Thanks, Steve


67 I6 coupe to be restored

Now finally painted.... Until I sand it down and try again.
sparky65 is offline  
post #6 of 19 (permalink) Old 01-27-2008, 09:08 AM
Senior Member
 
Join Date: Oct 2003
Location: N.Y.
Posts: 1,742
So far, I have one without the extra hole.Unfortunately it is sitting on my spare six cylinder motor that is sitting in my Garage at the Jersey Shore.How soon do you need one?I don't have plans to go down there in the near future. P.S. I have alot of spare parts so I'll keep looking.
EastCoastClassic is offline  
post #7 of 19 (permalink) Old 01-28-2008, 12:19 AM
Member
 
Join Date: May 2005
Location: Bay Area, CA
Posts: 82
I'm also interested in the 1100 carb...Is it in working condition?

Thanks

1967 Convertible, 6 cylinder
reweb is offline  
post #8 of 19 (permalink) Old 01-28-2008, 10:01 PM Thread Starter
Senior Member
 
Join Date: Nov 2002
Location: NJ
Posts: 1,813
Quote:
Originally Posted by reweb
I'm also interested in the 1100 carb...Is it in working condition?

Thanks
Apparently it is not an Autolite. The info on the tag is as follows:
Motorcraft
D0PF K
A1H17

Thanks, Steve


67 I6 coupe to be restored

Now finally painted.... Until I sand it down and try again.
sparky65 is offline  
post #9 of 19 (permalink) Old 01-31-2008, 09:27 PM
Senior Member
 
schweitzga's Avatar
 
Join Date: Oct 2007
Location: Traverse City, MI
Posts: 206
Garage
Send a message via AIM to schweitzga
Have you got an extra exhaust manifold with a late 1964 or very early 1965 date code? I need one!

It's all there, really...



MCA #00181
schweitzga is offline  
post #10 of 19 (permalink) Old 02-01-2008, 01:33 PM
Senior Member
 
Join Date: Jul 2000
Location: Massachusetts
Posts: 1,078
Did you get one yet? Is this like the one you are looking for?



I know I have one of these, it's just a matter of finding it. If you still need it let me know, you can have it.
amartin725 is offline  
post #11 of 19 (permalink) Old 02-04-2008, 07:51 PM Thread Starter
Senior Member
 
Join Date: Nov 2002
Location: NJ
Posts: 1,813
just an update. Someone is sending me what i need. If it doesnt workout i will let you new. I thought i had another exhaust manifold but i cant find it.

Thanks, Steve


67 I6 coupe to be restored

Now finally painted.... Until I sand it down and try again.
sparky65 is offline  
post #12 of 19 (permalink) Old 02-17-2008, 12:37 PM
 
Join Date: Feb 2008
Posts: 15
Check out this chrome T'stat housing for $24: http://classicinlines.com/products.asp?cat=61
TonyS is offline  
post #13 of 19 (permalink) Old 03-02-2008, 01:18 PM
Member
 
Join Date: Nov 2007
Posts: 66
How much for the valve cover? I don't have much to trade, but need lots of stuff. Got a vacuum advance?

Pete
67 Sport Sprint
A/C, AM radio.
A true survivor
(except for the 200CID)
phoyt is offline  
post #14 of 19 (permalink) Old 03-03-2008, 10:03 AM
Senior Member
 
1968mustang6's Avatar
 
Join Date: Sep 2006
Location: Arlington, TX
Posts: 1,054
i have an original valve cover and an exhaust manifold if anyone needs them.


1968 Coupe, Grab-a-trak front and rear suspension, 302 HO, c4, 8 inch rear, 2005 split 5 star rims, making a modded california special.
1968mustang6 is offline  
post #15 of 19 (permalink) Old 03-03-2008, 07:47 PM Thread Starter
Senior Member
 
Join Date: Nov 2002
Location: NJ
Posts: 1,813
what year exhaust manifold do you have? I think i am going to replace mine because it leaked bad even with the gasket.

What year valve cover i have a 68 or a 66 should be the same as 67. Will have to check on the vacuum advance.

Thanks, Steve


67 I6 coupe to be restored

Now finally painted.... Until I sand it down and try again.
sparky65 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Vintage Mustang Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome