Vintage Mustang Forums

Vintage Mustang Forums (https://forums.vintage-mustang.com/)
-   Wheel and Tire Forum (https://forums.vintage-mustang.com/wheel-tire-forum/)
-   -   Minimum required clearance (https://forums.vintage-mustang.com/wheel-tire-forum/1162294-minimum-required-clearance.html)

j persons 08-12-2019 07:09 AM

Minimum required clearance
 
what is the minimum clearance required between the caliper in the inside of the wheel? I have a set of 3 piece modular wheels in 16" dia, and bolted one up to my SorT 13" disc brakes. There is some very minor interference between the outside brake pad locating tab and the inside of the rim that I could take care of with a little grinder work. The wheels are Eplison 3 piece modulars, cast mesh centers and a forged rim. They have black centers and a polished rim. Sort of a BBS knock off.

blueovalfan68 08-12-2019 12:29 PM


rgsauger 08-20-2019 01:12 AM

I had to grind the caliper body AND run .25 spacers to clear my Mustang Steve 2010 GT discs front and rear. Wheels are Legendary Scott drakes. 17x8 with 4.75 bs. But Legendary leaves you zero damn room for non stock discs. Looks like a million bucks but took work to get there. Calipers are still THICK so not worried there. 64.5 v8 car

rgsauger 08-20-2019 01:16 AM

2 Attachment(s)
235 45 17. Fenders rolled in front.

rgsauger 08-21-2019 01:50 AM

1 Attachment(s)
Legendary 17x8

rgsauger 08-21-2019 02:17 AM

1 Attachment(s)
Legendary


All times are GMT -4. The time now is 11:13 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome